Products Gallery
![]() |
The process involving conversion of fluid into fine droplets and exposing them to a hot drying media, so as to achieve defined dry particulate matter is spray drying. The major types are: |
||
![]() |
A spin flash dryer produces powder from feed, which is viscous or gelatinous in nature, paste or filter cake. The two step process involves disintegration of the feed and drying of the disintegrated feed. Depending upon the nature of the feed material, conventional arm design could be used for crystalline, non-sticky material or Acmefil's specially engineered rotating spin design disintegrator could be used to handle sticky and gelatinous materials. |
||
![]() |
A flash dryer is used to dry residual moisture from
centrifuged cakes or powders. |
||
![]() |
SPRAY PYROLYSIS SYSTEMS is custom built drying system used for continuous transformation of liquid feed into a dried solid product by spraying the feed into a stream of hot drying air. |
||
![]() |
Spray Cooling is a process of conversion of molten
mass into droplets which is exposed to cold air and thereby
solidifying the liquid into defined particles size. |
||
![]() |
Evaporation is the process, which involves
thermally removing a liquid from a solution, suspension or emulsion.
The starting and the end products are in the liquid phase and the end
product obtained is in its concentrated from.
Falling Film
Evaporators |
||
![]() |
These dryers have a bed of solid particles, which are fluidized by passing a stream of air or gas upward through a specially designed perforated sheet. The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids. The air or the gas is heated and the heat is utilized to dry the solids. Fines get agglomerated to larger particles thus providing large size granules. Types of Fluid Bed Dryers manufactured are:
Batch Type
Fluid Bed Dryers |
||
![]() |
These driers have a bed of solid particles, which are fluidized by passing a stream of air or gas upward through a specially designed perforated sheet. The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. |
||
![]() |
A complete spectrum of MEMBRANE SEPARATION SYSTEMS
are offered, be it Reverse Osmosis, Nano, Ultra or Micro Filteration.
Used as the latest technology for separation at molecular level for
applications like : |
||
![]()
|
|
||
![]() |
Our Products
![]() |
|
![]() |
|
![]() |
|
![]() |
|
![]() |
|
![]() |
Evaporator |
![]() |
Fluid Bed Dryer |
![]() |
|
![]() |
|
![]() |
|
![]() |
Other Products |